Applications Of Ceramic Material Engineering Essay

Ceramicss which means thrower ‘s Earth or clay is a stuff made from of course happening clay. Scientifically it may be considered as a compound consisting both metallic and non metallic elements. Diamond and SiC are illustrations of manufactured ceramics. Ceramic may besides be defined as inorganic or non metallic stuffs processed or used at high temperatures. In ancient times ceramics were pottery which were made from clay itself or assorted with other stuffs nevertheless new ceramic stuffs have been developed for usage in ceramic technology, such as semiconducting materials.

There are traditional ceramics and advanced ceramics. Materials such as China clay, Talc, Feldspar, Silica and Dolomite were some of common stuffs used in traditional ceramics. They were used because of their belongingss such as dry strength, malleability and shrinking. Sel3ction of stuffs, size of atoms and atom form have great impact on concluding merchandises. In advanced ceramics industry, the pureness of ceramic pulverization is a great job while in traditional it is non. Some of the traditional ceramics merchandises are: clayware, tableware, healthful ware, tiles, blocks and electrical porcelain. Advanced ceramics on the other manus, are chiefly used for electrical, electronic, optical and magnetic applications. In this sector, techniques of production must be used to do certain that ceramic pulverizations possess sufficient pureness. ( 2 )

Types of ceramic merchandises

Ceramic are of four different classs. Structural ceramic comprises tiles, bricks and pipes. White wares ceramic which include objects like decorative, healthful ware, table ware and wall tiles. The illustrations of white ware ceramics are stone ware, porcelain, bone China and earthen ware. Refractories ceramic like glass and steel edifice melting pots, gas fire radiant and kiln liners. Technical or all right ceramics merchandises which include tiles applied in the infinite bird plan, ballistic munition, bio-medical implants, missile nose cones, atomic fuel U oxide pellets and jet engine turbine. ( 1 )

Properties of Ceramicss

Mechanical Properties

Electrical Properties

Physical Properties

They show fictile distortions.

They are semi music directors

They are by and large difficult

They are crystalline or formless

Some ceramics become ace music directors under highly low temperatures

Brittle

They are normally covalently bonded or ionic substances

Most of them are transitional metal oxides

Ceramicss are classified into crystalline or non-crystalline. Non-crystalline are made from thaws and are known as glass ceramics. They are non common since they require a batch of processing as compared with crystalline ceramics. ( 1 )

Uses of Ceramicss and Why They Are Used

Uses

Reason

They are used in doing knives

Though they are brickle, their blades are more lasting.

Their knives are sharper than steel knives.

Alumina and boron carbide are used as “ Small Arms Protective Inserts ”

This is because of the low weight of the stuff

Ceramic balls can be used to replace steel in ball bearings

Due to their hardness they have a longer life-time

Ceramic engines can be used in research labs

They have high fuel efficiency and do non necessitate chilling.

High-tech ceramic is used in ticker devising for bring forthing ticker instances

The stuff is valued by horologists for its light weight, scratch-resistance, lastingness and smooth touch.

Hydroxyapatite ceramics used to surface metal orthopaedic devices by organizing a bond as bone fillers.

They are really porous and lack mechanical strength.

Fictile Materials

Plastic means capable of being shaped or molded. Its plasticity allows when its being produced allows it to be pressed and do many forms. Used in the industry of industrial merchandises, fictile stuffs are of man-made or semi man-made organic solids. Fictile stuffs are polymers of high molecular mass and contains other substances which improve in bend cut down cost or increase public presentation. However they are of two types, that is, thermoplastics and thermosetting polymers. When heated, Thermoplastics do n’t undergo chemical alteration in their composing. Polyethylene, polystyrene, polyvinyl chloride and Teflon are chief illustrations which can be molded once more and once more. Thermosets on the other manus, stay solid when they solidify since they melt and take form one time.

Properties of Plastics

Name

Properties

Density

Common Uses

Polyethylene Terephthalate

Tough, stiff, shatter-resistant, softens if heated

1.38-1.39 g/ml

Soda, H2O, juice, and cooking oil bottles

High Density Polyethylene

Semi-rigid, tough, flexible

0.95-0.97 g/ml

Milk and H2O jugs, bleach bottles

Polyvinyl Chloride

Strong, semi-rigid, calendered

1.16-1.35 g/ml

Detergent bottles, shampoo bottles, shrink wrap, pipes

Low Density Polyethylene

Flexible, non crinkled, moisture-proof

0.92-0.94g/ml

Garbage bags, sandwich bags, 6-pack rings

Low Density Polyethylene

Flexible, non crinkled, moisture-proof

0.92-0.94g/ml

Yogurt cups, oleo baths, screw-on lids/caps

Polystyrene

Frequently brickle, sometimes calendered, frequently has strong chemical reactions

1.05-1.07 g/ml

Styrofoam, egg cartons, packing pellets, take-out containers

Industry of Plastics

They are manufactured in two ways: blow casting and blown movie. In blow casting procedure, plastic parts are formed by runing and squeeze outing plastics into a hollow tubing called parison. It is so taken by shuting it into a cooled metal cast. The plastic will take the form of a cast when air is blown into the parison. Once it has cooled, the cast is opened and the fictile portion removed. Milk bottles and family chemical containers are illustrations of blow casting merchandises. In blown movie, in blown movie, plastic thaw is extruded through an annulate dice, normally vertically, to organize a thin walled tubing. Air is so introduced from a hole in the Centre of the dice by blowing up the tubing as a balloon. Mounted on the top of the dice, an air pealing blows onto the hot movie to chill it. The tubing of movie so continues upwards, continually chilling, until it passes through axial rotations where it is flattened and so winded in to axial rotations. The movie is used as is or in a subsequent procedure to change over into bags that have many different consumer and industrial applications. Plastics have been the fastest turning basic stuff because they are: versatile, lightweight, tough, energy economy, low cost, lasting and reclaimable. ( 3 )

Uses of plastics

Name

Uses

Reason

High Density Polyethylene ( HDPE )

Used for doing nutrient merchandises containers

Its economical,

It has a good wet barrier, its compatible with acids, it is an first-class pick for silk-screening when fire treated

Low Density Polyethylene ( LDPE )

Usedmainly for squashing applications.

It is less chemically immune compared with HDPE

Polypropylene ( PP )

Used in packaging, fabrics for illustration ropes, thermic underwear and rugs, letter paper, plastic parts and reclaimable containers of assorted types and besides in industry of laboratory equipment.

It is stable at high temperatures, it has first-class chemical opposition

Polystyrene ( PS )

Usedto make fictile jars.

It creates a stiff walled container of first-class lucidity

Polyvinyl Chloride ( PVC )

Used to insulate electrical wires, industry of pipes and in vesture industries

It has highly good opposition to oils and besides a good bead impact opposition

Polyethylene Terephthalate ( PET )

Used to do sodium carbonate bottles and H2O bottles

Hasexcellent lucidity and really good intoxicant and indispensable oil barrier belongingss, has a high grade of impact opposition.

Metallic element Materials

Metallic elements are chemical elements that form cations and ionic bonds when combined with non metals. They are both good music directors of heat and electricity. It can be an component, compound or an metal which is characterized by high electrical conduction. Delocalized ions which are responsible for the conduction surround the ions. They form a metallic adhering which in bend signifier a solid which is held by electrostatic interactions between the ions and the negatron cloud.

When two metals are mixed together they form alloys. Most pure metals are either excessively soft, brickle or chemically reactive for practical usage. Uniting different ratios of metals as alloys modifies the belongingss of pure metals to bring forth desirable features. The purpose of doing metal is by and large to do them less brickle, harder, immune to corrosion, or have a more desirable colour and lustre

Classs of metals

Metallic elements may be categorized in different signifiers which include ; base metal, cherished metal, Nobel metal and ferric metal. Base metal is a metal that oxidizes or corrodes easy and reacts with dilute acids to bring forth H. Ferric metal are metals that contain Fe and may be magnetic. Examples are shaped Fe and metals such as steel. Baronial metals are that which do non eat or undergo oxidization. Baronial metals are really rare and be given to be cherished. Examples include Ta, Pt and gold. Cherished metals on the other manus are besides rare and have chemical component of high economic value. These metals are well less reactive compared with other metals. In contrast to tradition where they were viewed as currency, cherished metals are presently used as investing and industrial trade goods. ( 4 )

Properties of common metals

Metallic element

Uses

Properties

Aluminum

used for H2O pipes and electrical wires

It is glistening, non-toxic ( non toxicant ) , low denseness ( light for its size ) and does non eat ( rust ) .

Copper

used for Bridgess, manhole screens and Gatess

Good electrical music director, a good heat music director and does non eat ( rust ) .

Iron

used for aircraft and overhead electricity overseas telegrams

It is a difficult, strong, and cheap and it corrodes ( rusts ) .

Extraction of Metallic elements

Metallic elements are removed from the Earth, by agencies of mining. They are removed in footings of ores which result to really utile elements. Mineral beginnings are divided into subsurface mines and surface mines which are extracted by usage of heavy machines. Chemical or electrolytic decreases are the methods used to pull out metal from the ore.ore are converted to natural stuffs by usage of pyrometallurgy. ( 4 )